Why Sharp All in One Printer does not allow 2-sided copy from bypass tray?
If two-sided printing or 2 IN 1 copying is selected when the bypass tray is already selected, or the bypass tray is selected when two-sided printing or 2 IN 1 copying is already selected on your Sharp All in One Printer, press the [TRAY SELECT] key to select a paper tray.
What to do if Sharp Copier is unable to scan?
If your Sharp Copier is unable to scan, try shutting down your computer, turning off the machine's power switch, and unplugging the machine's power cord. Then, restart your computer, restore power to the copier, and try scanning again. If your application is not TWAIN/WIA compliant, scanning will not be possible. Also, scanning a large area in full color at high resolution results in a large amount of data and extended scanning times.
What to do if error indicator is blinking on Sharp AR-M150 All in One Printer?
If the error indicator on your Sharp All in One Printer is blinking, it could be due to several reasons. A paper misfeed might have occurred, so clear any paper jams. The cover or the SPF/RSPF cover might be open, so ensure they are closed. The toner cartridge could be empty, requiring a replacement. If [L1-00] appears, turn off the power, release the scan head locking switch, and turn the power back on. If none of these apply, try turning the power off, waiting 10 seconds, and turning it back on. If the error persists, contact an authorized service representative.
What to do if Sharp All in One Printer displays 'CHECK SPF/RSPF'?
If the Sharp All in One Printer is displaying 'CHECK SPF/RSPF. START TO RESUME,' it may be because an original document remains on the document glass or the original is too thick to scan. Remove the original. If there is no original on the document glass, the underside of the SPF/RSPF may be dirty; clean it.
How to fix 'NO PC COMMUNICATION' error on Sharp AR-M150 All in One Printer?
If your Sharp All in One Printer shows 'NO PC COMMUNICATION; CHECK CABLE,' it means the machine is not correctly connected to the computer. Check the cable connection, especially when using the scanner function.
Why wrinkles appear on copies from Sharp AR-M150 All in One Printer?
If wrinkles appear in the paper or the image disappears in places when using your Sharp All in One Printer, it could be due to using paper outside the specified size and weight range. Use copy paper within the specified range. Also, avoid using curled or damp paper.
What to do if Sharp AR-M150 displays 'LOAD XXXX PAPER'?
If the Sharp All in One Printer displays 'LOAD XXXX PAPER INTO TRAY,' it means there is no paper for printing. Press the [MODE SELECT] key to switch to printer mode and follow the instructions in the display.
Why image is cut off on Sharp All in One Printer copies?
If parts of the image are cut off or there is too much blank space on copies from your Sharp All in One Printer, ensure the original is placed correctly. Adjust the zoom ratio by pressing the [ZOOM] key to match the original and paper sizes. If you change the paper size in the tray, also update the tray's paper size setting accordingly.
Why my Sharp All in One Printer does not operate?
If the Sharp All in One Printer is not operating, ensure it is plugged into a grounded outlet and the power switch is turned on. If the power save indicator is blinking, the machine is warming up. Also, check that the front or side cover is completely closed. If the machine is in auto power shut-off mode, press the start key to resume normal operation. Finally, ensure that the scan head locking switch is unlocked.
Why is the print image light and uneven on my Sharp Copier?
A light and uneven printed image on your Sharp Copier can be due to the paper being loaded incorrectly. Some paper types have a designated front and back side. If the paper is loaded with the back side facing up for printing, the toner may not adhere properly, resulting in a poor image.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed | 15 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 15 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 kbps |
| Max Paper Size | A3 |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Warm-up Time | 30 seconds |
| Original Size | A3 |
| Supported Operating Systems | Windows, Mac |
Lists warnings and cautions for operating the machine.
Guidelines for choosing a suitable location for the machine.
Guidance on how to use the operation manual effectively.
Details on copying speed and first-copy time.
Information on copying resolution and image modes.
Describes the feature to scan once and print multiple copies.
How to use the machine as a printer.
How to use the machine as a scanner.
Identifies the various parts of the machine with labels.
Instructions on how to turn the machine on and off.
Explains the function of each key and display on the operation panel.
Details on recommended paper types, sizes, and weights.
Step-by-step guide to loading paper into the tray.
Instructions for using the bypass tray for various paper types.
How to adjust the paper size setting for trays.
Basic steps for making copies using the document glass.
Instructions for using the document feeder (SPF/RSPF).
How to set the desired number of copies.
How to select the paper tray for copying.
How to make two-sided copies from one or two-sided originals.
Steps for sorting multiple copies into sets.
How to copy two originals onto one sheet.
How to shift the image to create margins.
Lists software on CD-ROM for printer/scanner functions.
Lists necessary hardware and software for installation.
Step-by-step guide for standard USB installation.
Steps for custom installation of software.
Steps for custom installation on Windows XP (USB/Parallel).
Steps for custom installation on Windows 98/Me/2000 via USB.
Steps for custom installation on Windows 95/98/Me/NT 4.0/2000 via Parallel.
Configuration steps for Button Manager.
Requirements for using Hi-Speed USB 2.0 connection.
How to use the machine's printer function.
Step-by-step guide for performing print jobs.
How to use the machine's scanner function.
Overview of user-configurable settings.
Steps to change settings in user programs.
Explains indicators and error codes displayed on the panel.
Lists common problems and their solutions.
Troubleshooting steps for software installation issues.
Instructions for removing paper misfeeds.
Overview of available system configurations and options.
Details of the optional facsimile expansion kit.
Details of the optional network expansion kit.
Details of the optional document feeders.
Technical specifications for AR-M150 and AR-M155 models.
Details on the machine's printer capabilities.
Details on the machine's scanner capabilities.
Terms and conditions for using the software.
Limitations on software usage and modification.
Warranty terms for the software media (disks).
Disclaimer regarding software warranties and usage.
To Next Page
