OPTIONAL EQUIPMENT
92
Using the AR-D16 with the printer function
To use the AR-D16 with the printer function, follow these steps to adjust the settings
in the printer driver.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
On Windows 95/98/Me/NT 4.0/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-M155" printer driver icon and from the
"File" menu select "Properties".
On Windows 95/98/Me, click the "SHARP AR-M155" printer driver icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Utility" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes the
settings needed to use the AR-D16.
Supply list
* Based on copying onto an A4-type paper at 6% toned area.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
Parallel interface cable
IEEE 1284-shielded type bi-directional parallel cable.
The printer driver cannot be set for use with the AR-D16 when opened
from the application.
The following option can not be used together (exclusive combinations) :
AR-M150 and RSPF (AR-RP8)
Supply Part number Usable life
TD cartridge AR-152T Approx. 8,000 sheets *
Note
Note
To Next Page
Loading...
