14
2
Chapter 2
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not installed or is improperly installed.
PAPER
For best results, use only SHARP recommended paper.
*
1
The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
*
2
Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*
3
When loading paper larger than A4 (8-1/2" x 11") size, do not use paper of weight
greater than 105 g/m
2
(28 lbs.).
Paper tray
type
Paper type Size Weight Capacity
Paper tray Standard paper
Recycled paper
A5
B5
A4
8-1/2" x 11"
8-1/2" x 13"
8-1/2" x 14"
56 g/m
2
to
80 g/m
2
(15 lbs. to 21 lbs.)
250 sheets *
1
(The paper
should not
exceed the
line on the
tray)
Bypass tray Standard paper
Recycled paper
A6 to A4
(3-1/2" x 5-1/2" to
8-1/2" x 14")
56 g/m
2
to
80 g/m
2
(15 lbs. to 21 lbs.)
50 sheets *
1
Thick paper 52 g/m
2
to
128 g/m
2
(14 lbs. to 34.5
lbs.)*
3
Load one
sheet at a
time in the
bypass tray.
Transparency
film/Labels
Envelopes *
2
International DL
International C5
Monarch
Commercial 9
Commercial 10
LOADING PAPER
To Next Page
Loading...
