To Next PageTo Next PageWhy is two-sided printing not working on my Sharp All in One Printer?
This could be because [2-Sided (Book)] or [2-Sided (Tablet)] is not selected in the "Main" tab of the printer driver. Also, two-sided printing may have been prohibited in the key operator programs. Consult the key operator.
Why is my Sharp All in One Printer requesting a password?
A password is required when executing printing if you entered a password for the retention function. If the password is not known, printing cannot be executed.
How to fix Sharp All in One Printer when it's on but not receiving data?
First, ensure the USB or parallel cable is correctly connected to both the printer and your computer. If the connection is correct, install the appropriate printer driver. Finally, verify that the printer is selected in your software application or use a utility to confirm the printer is registered on the network. Consult your network administrator for additional help.
What to do if Sharp All in One Printer receives data but does not print?
Ensure that paper is loaded. You may also need to select another paper size or cancel the printing job.
Why does my Sharp All in One Printer stop in the middle of a print job?
This can happen if the tray full sensor is activated because there are too many pages in the exit tray. Remove the paper from the exit tray. Also, ensure that paper is loaded in the printer.
How to correct the image orientation on my Sharp All in One Printer?
Correct the orientation settings within the printer driver.
Why is the inserter not operating on my Sharp All in One Printer?
The use of the inserter may have been prohibited in the key operator programs. Consult the key operator.
Why is the stapler not working on my Sharp All in One Printer?
This could be because the use of the stapler has been prohibited in the key operator programs. Consult the key operator. Also, make sure that you did not attempt to staple more than the maximum number of pages.
What causes a printer write error when printing from the parallel port on a Sharp All in One Printer?
The timeout setting for the printer driver might be too short. Set a longer time in the timeout setting in the printer driver.
What to do if not all of the image is printed by Sharp All in One Printer?
If multiple applications are running at once, quit all applications that you are not using and try printing again.
General| Print Speed (Black/A4) | 55 ppm |
|---|---|
| Monthly Duty Cycle | 200, 000 pages |
| Scan Resolution | 600 x 600 dpi |
| Modem Speed | 33.6 Kbps |
| Functions | Copier, Printer, Scanner |
| Original Size | A3 |
| Copy Speed | 55 ppm |
| Zoom Range | 25 - 400% |
| Paper Sizes | A3, A4, A5, B4, B5 |
| Interface | USB 2.0, Ethernet 10/100Base-T |
| Network Protocols | TCP/IP |
| Scan Speed | 70 ipm |
| Standard Interfaces | USB, Ethernet |
| Operating System Compatibility | Windows |
| Scanner Type | Flatbed, ADF |
