Quick Reference Guide: AR-M237/M277
Simulation
10
Simulation: Diagnostics, Setup, Adjustment Value Input, and Data Display
Entering the Simulation Mode
1. Copy mode key ON → Program key ON → Asterisk (*) key
ON → CLEAR key ON →Asterisk key ON → Ready for
input of a main code of simulation
2. Entering a main code with the 10-key → START key ON
3. Entering a sub-code with the 10-key → START key ON
4. Select an item with the scroll key and the item key.
5. The machine enters the mode corresponding to the
selected item.
a) Press START key or EXECUTE key to start
the simulation operation.
b) To cancel the current simulation mode or to
change the main code or the sub code, press
the user setup key.
*Canceling the simulation mode to return to the
normal mode:
Simulation List
Please refer to the Simulation List (pages 1 through 10) that follows.
6. Press CA key.
How to Change the Simulation Adjustment Value Set by the Touch Panel
in the Adjustment Value Entry Process
Target SIM List
Touch Panel Operating Procedure
To Next Page
Loading...
