12
INSTALLING THE SOFTWARE
10
When the port selection window
appears, select the port that the printer
driver is using (USB001, etc.) and click
the "Next" button.
11
When the model selection window
appears, select model name of your
machine and click the "Next" button.
12
Select whether or not you wish the
PC-Fax driver to be your default printer
and click the "Next" button.
13
When the printer name window
appears, click the "Next" button.
If you wish to change the printer name, enter
the desired name.
14
Click the "Next" button.
15
When the installation completed
screen appears, click the "OK" button.
16
Click the "Close" button.
This completes the installation of the
software.
•
The port used by the printer driver is
indicated by a checkmark in the
"Ports" tab of the printer driver
properties window. (In Windows
98/Me, the port is selected in "Print to
the following port" in the "Details" tab.)
• The USB port name will vary
depending on the number of USB
ports created on your computer. If
the port created during installation
of the printer driver is your first USB
port, the name will be "USB001".
Note
!02_InstallGuide-body.fm 12 ページ ２００６年１２月２５日 月曜日 午後３時４１分
To Next Page
Loading...
