72
TROUBLESHOOTING AND MAINTENANCE
3
If staple sort copying is being
performed, open the paper guide and
remove any misfed paper from the
stapler compiler.
4
Close the stapler compiler cover.
5
If the offset tray is being used, remove
any misfed paper from the offset tray.
6
If the top tray is being used, open the
top cover, remove any misfed paper,
and close the top cover.
Make sure that the
misfeed message is
cleared.
ar_m318_uk_cpy.book 72 ページ ２００７年１月１５日 月曜日 午前１１時３６分
To Next Page
Loading...
