Sharp AR-M257

28
COPY FUNCTIONS
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
The original for the front
side is scanned.
7
Remove the first original and then place
the original for the back side on the
document glass. Close the RSPF and
then press the [START] key ( ).
To cancel automatic
two-sided copying, press
the [CLEAR] key ( ).
USING THE RSPF
1
Place the original(s) in the document
feeder tray. (p.23)
2
Touch the [2-SIDED COPY] key.
3
Touch the desired copy mode.
4
Touch the [OK] key.
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key ( ).
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
ACC.#-C
When making two-sided copies of an odd
number of originals, touch the [READ-END]
key after scanning the last original.
Note
OUTPUT
2-SIDED COPY
D COPY
BIN
CHA
Y TO COPY.
Portrait-oriented original
(11" x 17" or 8-1/2" x 14" size)
Before [BINDING CHANGE] After [BINDING CHANGE]
Touch the
[
BINDIN
G
C
HAN
G
E
]
key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided 11" x 17" or 8-1/2" x 14" size portrait
original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
EXPOSURE
AUTO 8½x11
PAPER SELECT
100%
ACC.#-C
!Andromeda_copy_sec.book 28 ページ ２００６年１２月１８日 月曜日 午前９時３５分