73
TROUBLESHOOTING AND MAINTENANCE
5
3
If staple sort copying is being
performed, open the paper guide and
remove any misfed paper from the
stapler compiler.
4
Close the stapler compiler cover.
5
If the offset tray is being used, remove
any misfed paper from the offset tray.
6
If the top tray is being used, open the
top cover, remove any misfed paper,
and close the top cover.
Make sure that the
misfeed message is
cleared.
!Andromeda_copy_sec.book 73 ページ ２００６年１２月１８日 月曜日 午前９時３５分
To Next Page
Loading...
