AR-M350 SIMULATIONS 10-24
<List of display values>
<Jam code table>
<List of display values>
<List of display values>
22-11
Purpose Adjustment, setup, operation data output, check
(display)
Function (Content) Used to check the use frequency of FAX.
(send/receive) (Only when FAX is installed.)
Section FAX
Item Data
Operation/Procedure The counter data below are displayed.
FAX SEND Number of times of FAX sending
FAX RECEIVE Number of times of FAX receiving
FAX OUTPUT FAX print quantity
SEND IMAGES Quantity of sending
SEND TIME Time for sending
RECEIVE TIME Time for receiving
22-12
Purpose Adjustment, setup, operation data output, check
(display)
Function (Content) Used to check the misfeed position and the
number of misfeed at that position.
(If the number of misfeed is considerably great,
the machine must be repaired.)
Section DSPF
Item Trouble
Operation/Procedure The history of the latest 50 paper jams is
displayed. (Refer to the jam code table below.)
Code Description
SPSD_N SPSD not-reaching jam
SPSD_S SPSD remaining jam
SPOD_N SPOD not-reaching jam
SPOD_S SPOD remaining jam
SPSDSCN Exposure start timer end
SIMULATION 22-11
FAX COUNTER DATA DISPLAY.
FAX SEND : ******** FAX RECEIVE : ********
FAX OUTPUT : ********
SEND IMAGES : ******** SEND TIME : ********:**:**
RECEIVE TIME : ********:**:**
SIMULATION 22-12
SPF JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
...............
(10 lines x 80 digits = 800 characters)
22-13
Purpose Adjustment, setup, operation data output, check
(display)
Function (Content) Used to display the process cartridge data.
Section
Item Counter
Operation/Procedure The counter data below are displayed.
DRUM Drum cartridge counter Count value (counts)
Rotating time (sec)
TONER Toner cartridge counter Count value (counts)
Rotating time (sec)
DEVE Developer cartridge counter Count value (counts)
Rotating time (sec)
22-19
Purpose Adjustment, setup, operation data output, check
(display, print)
Function (Content) Used to display the scanner mode counter.
Section
Item Counter
Operation/Procedure The counter values related to the network
scanner are displayed.
NETWORK SCANNER
ORIGINAL COUNTER
Number of scanned documents
(total of OC and SPF)
MAIL COUNTER Number of times of mail sending
FTP COUNTER Number of times of FTP sending
SIMULATION 22-13
PROCESS CARTRIDGE DATA DISPLAY.
DRUM : ********(counts) **********(sec.)
TONER : ********(counts) **********(sec.)
DEVE : *********(counts) **********(sec.)
SIMULATION 22-19
NETWORK SCANNER COUNTER DISPLAY.
NETWORK SCANNER ORIGINAL COUNTER : *********
MAIL COUNTER : ********
FTP COUNTER : ********
'( !"# $%&
To Next Page
Loading...
