Sharp AR-M450 - Page 88

AR-M350 SIMULATIONS 10-27
<List of set values>
<List of set values>
<List of set values>
24-10
Purpose Data clear
Function (Content) Used to clear the FAX counter.
Section FAX
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 FAX SEND: Number of times of FAX sending
2 FAX RECEIVE: Number of times of FAX reception
3 FAX OUTPUT: FAX print quantity
4 SEND IMAGES: Sending quantity
5 SEND TIME: Time for sending
6 RECEIVE TIME: Time for reception
1
SIMULATION 24-10
FAX SEND COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
24-11
Purpose Data clear
Function (Content) Used to reset the drum rotation time, toner motor
rotation time, and developer rotation time
counters. The developer counter of the DV unit
installed is reset.
Section Process
(OPC drum, developing, transfer, cleaning)
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Drum rotating time (cartridge)
2 Developing unit rotating time (cartridge)
3 Toner supply time (cartridge)
24-15
Purpose Data clear
Function (Content) Used to clear each counter in the scanner mode.
Section
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Document scan counter in the network scanner mode
2 Number of times of mail sending
3 Number of times of FTP sending
1
SIMULATION 24-11
DRUM ROTATION COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
SIMULATION 24-11
TIMER DATA CLEAR. SELECT1-3, AND PRESS START.
1. DRUM ROTATION (CARTRIDGE)
2. DV ROTATION (CARTRIDGE)
3. TONER SUPPLY (CARTRIDGE)
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
1
SIMULATION 24-15
NETWORK SCANNER ORIGINAL COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
SIMULATION 24-15
NETWORK SCANNER COUNTER CLEAR.SELECT1-3, AND PRESS START.
1.NETWORK SCANNER ORIGINAL COUNTER
2.MAIL COUNTER
3.FTP COUNTER
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
 '+       !"# $%&