Sharp AR-M450 - Page 87

AR-M350 SIMULATIONS 10-26
<List of set values>
<List of set values>
<List of set values>
<List of set values>
24-5
Purpose Data clear
Function (Content) Used to reset the developer counter.
(The developer counter of the DV unit installed is
reset.)
Section Process
(OPC drum, developing, transfer, cleaning)
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Developer cartridge counter
24-6
Purpose Data clear
Function (Content) Used to reset the copy counter.
Section
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Copy effective paper counter
1
SIMULATION 24-5
DV CARTRIDGE COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-5
DEVELOPER COUNTER DATA CLEAR. PRESS START.
1. DV CARTRIDGE
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
1
SIMULATION 24-6
COPY COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-6
COPY COUNTER DATA CLEAR. PRESS START.
1. COPY
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
24-7
Purpose Data clear
Function (Content) Used to clear the OPC drum counter and the
toner cartridge counter.
(Perform when the OPC drum is replaced.)
Section Process
(OPC drum, developing, transfer, cleaning)
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Drum cartridge counter
2 Toner cartridge counter
24-9
Purpose Data clear
Function (Content) Used to clear the printer print counter.
(After completion of maintenance, this counter
must be cleared.)
Section Printer
Item Counter
Operation/Procedure Select with 10 digit key pad and press START
key.
The procedure below is executed and the display
returns to the original state.
1: Counter is cleared 2: Not cleared
1 Printer counter
2 Other effective paper counter
1
SIMULATION 24-7
DRUM CARTRIDGE COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
SIMULATION 24-7
DRUM/TONER COUNTER DATA CLEAR. SELECTAND PRESS START.
1. DRUM CARTRIDGE
2. TONER CARTRIDGE
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
1
SIMULATION 24-9
PRINTER COUNTER DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
SIMULATION 24-9
PRINTER/OTHERS COUNTER DATA CLEAR. SELECT1-2, AND
PRESS START.
1. PRINTER
2. OTHERS
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
 '*       !"# $%&