SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION, AND FILE FORMAT)
21
4
Touch the [OK] key.
The specified original
size is displayed as the
scan size.
5
Touch the [OK] key.
You will return to the
initial screen.
6
The selected size appears in the top half of
the [ORIGINAL] key.
STORING, DELETING, AND USING ORIGINAL SIZES
Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is
turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you
fax that size of document.
To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key on
the screen.
Storing or deleting an original size
1
Touch the [ORIGINAL] key.
2
Touch the key under [SCAN SIZE].
*If a B/W scanner
module/SPF is installed,
the [2-SIDED] keys are
not displayed.
3
Touch the [CUSTOM SIZE] key.
4
Touch the [STORE/DELETE] key.
5
Touch the original size key ( ) that
you wish to store or delete.
To store an original size,
touch a key that does not
show a size ( ).
Keys that already have an
original size stored will show
the stored size ( )
To delete or change a
stored size, touch the key that shows the size that you
wish to delete or change.
If you are storing an original size, go to step 6.
If you are deleting an original size, go to step 8.
If you are changing an original size, go to step 8
and touch the [AMEND] key.
To Next Page
Loading...
