EN-10
INSTANT LOW WATTAGE
OPERATION
The air conditioner will operate with reduced
maximum power and excess power con-
sumption will be avoided.
1
During operation, press the
INSTANT LOW WATTAGE
button to select desired maxi-
mum wattage.
• The INSTANT LOW WATTAGE lamp
(
) will light up as follows.
(AH-PNX11)
Maximum wattage 600W 400W Free
Lamp (
)
Red Green OFF
(AH-PNX14)
Maximum wattage 800W 600W Free
Lamp (
)
Red Green OFF
NOTE:
• The unit memorizes the previous INSTANT
LOW WATTAGE setting and will be activated
the next time operated.
• INSTANT LOW WATTAGE operation can not
be available when the unit is in PLASMA-
CLUSTER operation at FAN mode and SELF
CLEAN operation.
1
SELF CLEAN OPERATION
SELF CLEAN operation will reduce the
growth mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms or
every 4 months.
1
Press the SELF CLEAN button
when the unit is not operating.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp (
)
will light up.
•
The unit will stop operation after 40 minutes.
TO CANCEL
Press the SELF CLEAN button.
• The blue PLASMACLUSTER lamp ( )
will turn off.
NOTE:
• You cannot set the temperature, fan speed, air
flow direction or timer setting during the SELF
CLEAN operation.
• Mold fungus already grown can not be
eliminated by this operation.
1
AH-PNX11_EN.indd 10 11.3.17 4:02:16 PM
To Next Page
Loading...
