EasyManua.ls Logo

Sharp AU-PNX11 - Adjusting Air Flow Direction; Vertical Airflow Adjustment; Horizontal Airflow Adjustment; Super Jet Operation

Sharp AU-PNX11
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN-6
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal airow louvre le-
vers and adjust the air ow direction.
CAUTION:
Never attempt to adjust the vertical airow lou-
vre manually.
Manual adjustment of the vertical airow lou-
vre can cause the unit to malfunction.
When the vertical adjustment louvre is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may res
ult.
VERTICAL AIR FLOW DIRECTION
1
Press the SWING button.
The vertical airow louvre will swing.
2
Press the SWING button again
to stop the desired position.
The adjustment range is narrower the
swing range in order to prevent conden-
sation from dripping.
ADJUSTING THE AIR FLOW
DIRECTION
1
2
Louvre levers
The air conditioner works at the maximum
power and optimum louvre direction to
makes the room cool rapidly.
1
During operation, press the
SUPER JET button.
The remote control will display “ ”.
The temperature display will go off.
The green SUPER JET lamp (
)
will light up.
The vertical airow louvre will be set
obliquely downward.
TO CANCEL
Press the SUPER JET button
again.
The green SUPER JET lamp ( )
will turn off.
The vertical airow louvre will return to
the original direction.
NOTE:
The air conditioner will operate at “Extra
HIGH” fan speed for 15 minutes, and then
shift to “HIGH” fan speed.
You can not set the temperature or fan speed
during the SUPER JET operation.
1
SUPER JET OPERATION
AH-PNX11_EN.indd 6 11.3.17 4:02:15 PM

Related product manuals