Sharp AU-PNX11 - Maintenance; Cleaning the Filters; Maintenance After Air Conditioner Season; Maintenance Before Air Conditioner Season

EN-11
ENGLISH
Be sure to disconnect the power cord from
the wall outlet or turn off the circuit breaker
before performing any maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the filters.
1
Lift the open panel.
2
Pull the air filters down to remove them.
3
Clean the filters.
• Use a vacuum cleaner to remove dust. If
the filters are dirty, wash them with warm
water and a mild detergent. Dry filters in
the shade before reinstalling.
4
Reinstall the filters and close
the open panel.
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them.
It can cause electrical shock or equipment
damage.
• Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
MAINTENANCE
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Operate the unit in the SELF
CLEAN operation to thoroughly
dry inside the unit.
2
Stop the operation and unplug
the unit.
• Turn off the circuit breaker, if you have
one exclusively for the air conditioner.
3
Clean the filters, then reinstall
them.
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
Make sure that the air filters are
not dirty.
2
Make sure that nothing ob-
structs the air inlet or outlet.
AH-PNX11_EN.indd 11 11.3.17 4:02:16 PM