1 Remove the remote control
cover.
2 Insert batteries in the compart-
ment, making sure the ± and
— polarities are correctly
aligned.
» The display indicates "AM
6:00" when batteries are prop-
erly installed.
3 Reinstall the cover.
E-4
NOTES:
» The battery life is approximately one year in normal use.
» When you replace the batteries, always change both batteries, and make sure
they are the same type.
» If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
» If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards the
unit’s signal receiver window and
press the desired button. The unit
generates a beep when it receives the
signal.
» Make sure there is no curtain or other
object between the remote control and
the unit.
» The remote control can send signals
from up to 7 metres away.
Remote control
cover
USING THE REMOTE CONTROL
INSTALLING BATTERIES Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
+
-
+
-
To Next Page
Loading...
