EN-16
Be sure to stop the operation and turn off
the circuit breaker before performing any
maintenance.
CLEANING THE AIR FILTERS
The fi lters should be cleaned every two weeks.
1
Turn off the unit.
2
Remove the fi lters.
1
Lift the open panel.
2
Pull the air fi lters down to remove them.
3
Clean the fi lters.
Use a vacuum cleaner to remove dust. If
the fi lters are dirty, wash them with warm
water and a mild detergent. Dry fi lters in
the shade before reinstalling.
4
Reinstall the fi lters and close the
open panel.
MAINTENANCE
MAINTENANCE AFTER AIR CONDI-
TIONER SEASON
1
Operate the unit in the SELF CLEAN
operation to thoroughly dry inside
the unit.
2
Stop the operation and turn off the
circuit breaker.
3
Clean the fi lters, then reinstall them.
MAINTENANCE BEFORE AIR CON-
DITIONER SEASON
1
Make sure that the air fi lters are not
dirty.
2
Make sure that nothing obstructs
the air inlet or outlet.
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour water on them.
It can cause electrical shock or equipment
damage.
• Do not use hot water, thinner, abrasive pow-
ders or strong solvents.
TIPS ON SAVING ENERGY
Below are some simple ways to save en-
ergy when you use your air conditioner.
Set the proper temperature
• Setting too higher or lower than necessary
temperature point will result in increased pow-
er consumption.
Block direct sunlight and prevent drafts
• Blocking direct sunlight during cooling opera-
tion will reduce power consumption.
• Close the windows and doors during cooling
and heating operations.
Keep fi lter clean to ensure the most ef-
fi cient operation
Turn off the circuit breaker when the
unit is not used for an extended period
of time
• The indoor unit still consumes a small amount
of power when it is not operating.
OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-16OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-16 10/19/12 5:42:37 PM10/19/12 5:42:37 PM
To Next Page
Loading...
Need help?
General
