Sharp BD-HP22S

Before Starting Playback
Turning the Power On
Turning the power on
Press B on the remote control or on the Player to
turn on the power of the Player.
Entering standby
Press B on the remote control or on the Player to
enter standby.
If you press B again immediately after entering standby,
the Player may not turn on. If this happens, wait for 10
seconds or more and then turn on the power again.
NOTE
When the B (Standby/On) indicator is blinking (may take
some time), the Player cannot be turned on.
•
•
Indicators on the Player
B (Standby/On) indicator
Green on Power on
Red blinks Preparing for standby
Red on Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 24.)
BD/DVD/CD mode indicator
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
When you turn on the power, the Menu screen
automatically displays for a while.
Press EXIT to erase the display.
•
22
B (Power)
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
B (Standby/On) indicator