Sharp BD-HP75U

BD-HP75U
3 – 1
BD-HP75U
Service Manual
CHAPTER 3. REMOVING OF MAJOR
PARTS
[1] REMOVING OF MAJOR PARTS
1. Removing the Top Cabinet and Front Panel Ass’y
1. Remove the 3 lock screws , 2 lock screws and detach the Top
Cabinet.
2. Unhook claws of the Front Panel and detach the Front Panel Ass’y.
2. Removing the RS232C Unit and Rear Panel
1. Remove the 2 lock screws .
Disconnect the Connecting Cord (RS232C - MAIN) and detach the
RS232C Unit.
2. Remove the 2 lock screws , 1 lock screw , 2 lock screws
and detach the Rear Panel.
3. Removing the BD DRIVE Unit
1. Disconnect the 2 FFC Connectors.
2. Remove the 4 lock screws and detach the BD DRIVE Unit.
3. Detach the Tray Blind Cover.
4. Removing the LCD Unit, MAIN Unit, POWER Unit
and Foot Decoration (Front/Rear)
1. Disconnect the FFC (LCD - MAIN).
2. Disconnect the Connecting Cord (USB - MAIN).
3. Remove the 2 lock screws and detach the LCD Unit.
4. Disconnect the Connecting Cord (POWER - MAIN).
5. Remove the 2 lock screws and detach the MAIN Unit.
6. Remove the 4 lock screws and detach the POWER Unit.
7. Remove the 4 lock screws and detach the Foot Decoration
(Front/Rear).
Top Cabinet
Front Panel Ass'y
1
2
2
Rear Panel
RS232C Unit
5
4
3
4
6
Connecting Cord
(RS232C - MAIN)
BD DRIVE Unit
FFC Connector
Tray Blind Cover
7
POWER Unit
FFC
(LCD - MAIN)
Connecting Cord
(POWER - MAIN)
Connecting Cord
(USB - MAIN)
MAIN Unit
LCD Unit
Foot Decoration
(Front)
Foot Decoration
(Front)
Foot Decoration
(Rear)
Foot Decoration
(Rear)
a
a
b
c
b
c
d
d
9
8
10
11
11
11
11