Select “Next”, then press ENTER.
For testing after confirming the settings, select
“Test”, then press ENTER.
If the test has failed, an error message appears.
Retry to perform the settings after checking that the
connection (page 23) is performed properly.
Confirm your setting.
Access Point:
Security key:
XXXXXXXXXXXX
XXXXXXXXXXXX
Test
Follow steps 6–11 of “When using a LAN Cable”
on page 45 to complete the network connection
settings.
12
13
•
14
Information on MAC addresses
A MAC address is a unique ID number for network
equipment. A MAC address is necessary for MAC
address filtering on the wireless router/access
point.
Before the wireless communication setup is
performed, we recommend writing down the MAC
address and keeping it in a safe place. (The MAC
address is displayed on the “Setting the info. of the
Ethernet” screen when wireless communication is
set (See step 5 of page 46).)
MAC address
SETTINGS
47
Settings
To Next Page
Loading...
