9
Sequence Cooking
Your oven can be programmed with up to 3 automatic cooking sequences, automatically switching from one variable
power setting to the next.
* Suppose you want to cook for 10 minutes on 50% followed by 3 minutes on 100%.
Step Procedure Pad Order Display
1
Enter desired cooking time.
2
Select desired power level by
pressing the POWER LEVEL pad
(for 50% press six times).
x 6
3
For second sequence, enter desired
cooking time.
If power is not selected, the oven will
operate at 100% power.
4
Press the INSTANT COOK/START
pad.
The timer begins to count down to zero.
When it reaches zero,
the second sequence will appear and
the timer will begin counting down to
zero again.
Instant Cook™
For your convenience Sharp’s Instant Cook allows you to easily cook for one minute on 100% power.
Step Procedure Pad Order Display
1
Press the INSTANT COOK/START
pad.
Within 3 minutes of closing the door,
cooking completion or pressing the
STOP/CLEAR pad.
The timer begins to count down.
Press the INSTANT COOK/START pad until desired time is displayed.
Each time the pad is pressed, the cook time is increased by 1 minute.
R-350Y OM_P1-P23.indd 9R-350Y OM_P1-P23.indd 9 7/5/11 4:48:40 PM7/5/11 4:48:40 PM
To Next Page
Loading...
Need help?
General