To Next PageTo Next Page
Need help?Do you have a question about the Sharp AX-1500J and is the answer not in the manual?
General information for service engineers.
Warning about exposure to microwave energy.
Safety warnings regarding oven operation and servicing.
Steps to take before starting any service work on the oven.
Procedures after completing testing and troubleshooting.
Checks to perform before replacing a PWB due to connection issues.
Steps to follow after completing repair work.
Information on the use of lead-free solder in the model.
Guidelines for using lead-free wire solder during repairs.
Precautions and techniques for soldering with lead-free solder.
Technical specifications of the Super Steam Oven.
Diagram and labels of the oven's main components and accessories.
Detailed layout and function of the touch control panel.
Explanation of display icons and information shown to the user.
Diagram illustrating water flow for steaming and drainage processes.
Table detailing electric part status for different heating modes.
Description of the oven's state when powered on but idle or in energy save mode.
Procedure for testing the magnetron for continuity and output power.
Tests for interlock switches to ensure safety and proper operation.
Procedure to test the monitor switch for correct operation.
Steps to test the F10A fuse and related components.
Method for checking oven temperature accuracy in convection mode.
List of error codes, their details, application modes, and checks.
Troubleshooting flowcharts for various error conditions.
Procedure to test the function and performance of the tube pump.
Guide to checking the performance of various oven sensors.
Method for checking the oven thermistor's performance and resistance.
Troubleshooting steps for EE01 and EE02 errors.
Troubleshooting for EEO5 and EE12 errors.
A list of common malfunctions and their corrective actions.
Troubleshooting guide for issues where the microwave function is not working.
Procedure to check input voltage for the inverter board.
Visual representation of the control unit and display unit components.
Diagram of the main electrical circuit for the oven.
Circuit diagram specific to the inverter unit.
Circuit diagram for the main control unit.
Circuit diagram for the display unit.
Critical safety warnings for high voltage and microwave energy exposure.
Step-by-step guide to remove the outer casing of the oven.
Instructions for removing the back plate assembly.
Procedures for removing, reinstalling, and adjusting the oven door assembly.
Steps to remove the door cover.
How to adjust the oven door for proper alignment and sealing.
Steps for replacing door sensing, secondary interlock, and monitor switches.
How to adjust door sensing, secondary interlock, and monitor switches.
Instructions for removing the bottom plate assembly.
Procedure to remove the engine unit assembly.
Steps to remove the tube pump assembly.
Procedure to remove the DC fan motor.
Instructions for removing the convection unit assembly.
Steps for replacing the magnetron.
Procedure to remove the sirocco motor.
Steps for removing the antenna motor.
Instructions for replacing the power supply cord.
Steps to prepare for microwave leakage testing.
List of oven components with part numbers.
List of cabinet components with part numbers.
List of door components with part numbers.
List of accessory parts and packing materials.
List of other miscellaneous parts.
Alphabetical index of parts.
General