Multiple Sequence Cooking
The oven can be programmed for up to 3 automatic cooking
sequences, switching from one power level setting to another
automatically.
Sometimes cooking directions tell you to start on one power
level and then change to a different power level Your oven can
do this automatically
" Suppose you want to cook roast beef for 5 minutes at 100%
and then continue to cook for 30 minutes at 50%.
1
Procedure
@Dm
I POWER
LEVEL
Enter first cooking time.
Touch POWER LEVEL pad twice
x 2 for 100% power.
[]@0@@
POWER
LEVEL
[]
Enter second cookingtime
Touch POWER LEVEL pad, Touch
number pad [] for 50% power
3 l STAaT ] Touch START pad
NOTE:
1 If POWER LEVEL pad is touched twice,
displayed.
,,J
will be
2. if 100% is selected as the final sequence, it is not necessary
to touch.the POWER LEVEL pad
3 if you wish to know power level, simply touch the POWER
LEVEL pad, As tong as your finger is touching the POWER
LEVEL pad, the power level wilt be displayed.
More or Less Time
Adjustment
Should you discover that you like any of the Instant Action,
Instant Start, COMPUCOOK, SNACKS & REHEAT, COMPU
DEFROST,EXPRESS DEFROST settings slightly more done,
touch the POWER LEVEL pad once after touching your choice
of pads.
Should you discover that you like any of the Instant Action,
Instant Start, COMPUCOOK, SNACKS & REHEAT, COMPU
DEFROST, EXPRESS DEFROST settings slightly less done,
touch the POWER LEVEL pad twice after touching your choice
of pads..
The POWER LEVEL pad must be touched within 1 second of
touching your choice of pads
Kitchen Timer /Timer
* Supposeyou wanttotimea 3 minute longdistance phone
call.
"- Procedure
Auto Start R-4A58, BR-,A,8t
If you wish to program your oven to begin cooking automati-
cally at a designated time of day, follow this procedure:
Suppose you want to start cooking a stew for 20 minutes on
50"/o at 4:30, Before setting, check to make sure the clock is
showing the correcf time of day
" Procedure "
1 _ [3--7 _ Enter the start time.
2 [ AUTO START Touch AUTO START/
CLOCK CLOCK pad
I
3
4
%%%%
POWER
LEVEL
D
Enter cooking program.
START 1 Touch START pad
NOTE: 1
2,
3,
Auto Start can be used for manual cooking, if
clock is set. It can be also used for SNACKS &
REHEAT and COMPUCOOK for model R-4A78
ff the oven door isopened after programming Auto
Start, it is necessary to touch the START pad for
the time of day to appear in the readout so that the
oven will automatically begin programmed
cooking at the chosen Auto Start time.
Be sure to choose foods that can be left in the
oven safely until the Auto Start time.. Baked
Potatoes are often a good choice..
t6
To Next Page
Loading...
Need help?
General
