– 9 –
CD-C612
CP-C612
1 Front Speaker 1. Front Panel ............ (A1) x1 9-1
2. Tip .......................... (A2) x2
3. Screw ..................... (A3) x4
STEP REMOVAL
PROCEDURE
FIGURE
CP-C612
Figure 9-2
Note:
The rear speakers can be easily disassembled.
Therefore the disassembling method is not discribed.
For details refer to the disassembling drawing in the Parts
Guide.
Screw Driver
Woofer
Piezo
(A3)x4
ø4x12mm
(A2)x2
Front Panel
(A1)x1
Be careful when installing the CD changer mechanism.
Install the CD changer mechanism on the CD player base after
the shift lever has been set in the highest position.
Figure 9-1
(L1)x4
ø3 x12mm
(M1)x1
ø2.6 x10mm
CD Changer
Mechanism
CD Mechanism
Shift Lever
CD Player Base
To Next Page
Loading...
