Do you have a question about the Sharp CD-E700 and is the answer not in the manual?
Brand | Sharp |
---|---|
Model | CD-E700 |
Category | Stereo System |
Language | English |
Identifies buttons and indicators on the front panel of the system.
Identifies input/output jacks and terminals on the rear panel.
Diagram showing the layout and numbering of remote control buttons.
Procedure for removing the record/playback and erase heads for Tape 2.
Procedure for removing the playback head for Tape 1.
Steps to remove the pinch roller for Tape 1 and Tape 2.
Procedure for removing the main and FF/REW belts for Tape 2.
Procedure for removing the main and FF/REW belts for Tape 1.
Steps to remove the motor from the tape mechanism.
Procedure for removing the loading motor from the CD mechanism.
Steps to remove the pickup unit, gear, and shaft from the CD mechanism.
Details for adjusting tape speed, including test tape and setting points.
Specifications for checking torque on the tape mechanism during play and rewind.
Test stages, frequencies, and instrument connection points for AM IF and RF.
Test stages, frequencies, and instrument connection points for FM RF.
Test stages, frequencies, and instrument connection points for FM IF.
Flowchart and instructions for performing the CD operation test mode.
Specifications for CD pickup mechanism, changer, and DSP errors.
Specifications for tuner PLL unlock error.
How to check speaker abnormal detection and +B PROTECTION status.
Troubleshooting steps for when the CD section does not operate.
Instructions for using a CD lens cleaner disc for maintenance.
Troubleshooting steps when a CD cannot be played, including error codes.