Sharp CD-ES600V - Speaker Connection; Aerial Connection

04/2/23 CD-ES600V(Z)E1.fm
E-10
ENGLISH
TINSZA060AWZZ
4
CD-ES600V
Preparation for Use
" Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
" Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
!
Use speakers with an impedance of 6 ohms or more, as lower im-
pedance speakers can damage the unit.
!
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
!
Do not let the bare speaker wires touch
each other.
!
Do not stand or sit on the speakers. You may
be injured.
Incorrect
Black
Red