Sharp CD-ES770 - Tape Playback; Cassette Playback Operation

23
04/12/21 CD-ES770(U)3.fm
TINSEA095AWZZ
Tape Playback
CD-ES770
Listening to a cassette tape (TAPE 1 or TAPE 2)
 Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
 TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
 / button (main unit and remote control): The unit turns on
and playback of the last function starts (CD, TAPE, TUNER,
GAME/VIDEO).
Before playback:
 For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not
recommended.)
 Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
 Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1 Press the ON/STAND-BY button to turn the power on.
2 Open the cassette com-
partment by pushing the
area marked " ".
3 Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played
facing toward you.
4 Press the TAPE (1 2) button to select the cassette you
want to listen to.
5 Press the / (TAPE )
to start playback.
Tape play indicator
TAPE 1 TAPE 2
6