Sharp CD-ES770 - Timer Settings Configuration

28
04/12/21 CD-ES770(U)3.fm
TINSEA095AWZZ
Advanced Features
CD-ES770
Timer and sleep operation (continued)
4 Within 10 seconds, press the or button to
select "ONCE SET" or "DAILY SET", and press the
MEMORY/SET button.
5 Press the or button to select "PLAY" or
"REC", and press the MEMORY/SET button.
The illustrations show the daily timer setting.
6 Press the or button to adjust the hour and
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily
timer mode.
7 Press the or button to adjust the minutes and
then press the MEMORY/SET button.
8 Set the time to finish as in steps 6 and 7 above.
White Red
9 Switch input with the or button, and then
press the MEMORY/SET button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
 When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/SET
button.
 If a station has not been programmed, " NO P.SET" will be
displayed and timer setting will be canceled.
10Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.