Sharp CD-ES777 - Tape Playback Operations; Playing Cassette Tapes

23
05/12/2 CD-ES777(U)3.fm
Tape Playback
CD-ES777
Listening to a cassette tape (TAPE 1 or TAPE 2)
 Tape playback
Auto power on function:
When you press any of the following buttons, the unit turns on.
 TAPE (1 2) button (main unit and remote control): The unit
turns on and the "TAPE" function is activated.
 button (main unit): The unit turns on and playback of the last
function starts (CD, TAPE, TUNER, GAME/VIDEO).
 TAPE button (remote control): The unit turns on and the "TAPE"
function is activated.
Before playback:
 For playback, use normal or low-noise tapes for the
best sound. (Metal or CrO tapes are not
recommended.)
 Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
 Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette com-
partment by pushing the
area marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment
with the side to be played
facing toward you.
4
Press the TAPE (1 2) button to select the cassette you
want to listen to.
5 Press the (TAPE ) to
start playback.
Tape play indicator
6