Sharp CD-JX20X(GY) - Page 7

0
0
0 0.n 0
0000
on00
0
00
H Dubbing
0 Try to use the same tape formula and length for the recording
tape as for the master tape.
1 Set the MAIN POWER switch to ON.
2 Press the TAPE button.
3L d oa a prerecorded cassette into the TAPE 7 cassette com-
partment. Insert a blank tape into the TAPE 2 cassette
compartment.
4 Set the REVERSE MODE switch to z to record on only
one side, or to 3 for continuous recording on both sides.
5 Press the ONE TOUCH EDIT button.
0 Press “NORMAL” to edit at normal speed, and “HIGH” to edit at
twice the normal speed.
0 Editing will begin with side A.
To stop dubbing:
Press the STOP (U) button.
0 TAPE 1 and TAPE 2 simultaneously stop.
After dubbing
The indicator of the TAPE 1 2 button is automatically switched to
“2”. Only when the tape is rewound and played back, the contents
currently dubbed can be confirmed.
Synchro-reverse editing function
When tapes which are different in length are used for recording and
editing continuously on both sides, as soon as one tape finishes, the
other is automatically fast forwarded, and edition begins from the be-
ginning of the other side.
-9-