E-20
CD-M10000W(X)E2.fm01/10/1
CD-M10000W
ENGLISH
1
2
3
4
5
6
7
Tape Playback
- Listening to a cassette tape (TAPE 1) -
Listening to a cassette tape (TAPE 1)
To stop playback:
Press the button.
Note:
You cannot fast-forward or rewind the cassette in the TAPE 1 compartment.
Before playback:
"
For playback, use normal or low-noise tapes for the best sound.
(Metal or CrO tapes are not recommended.)
"
Do not use C-120 tapes or poor-quality tapes, as they may cause mal-
functions.
"
Before loading a tape into the cassette compartment, tighten the slack
with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 1.
3
Open the cassette door by pushing the area marked " PUSH
EJECT".
4
Load a cassette into the TAPE 1 cassette compartment with the
side to be played facing toward you.
5
Press the ( ) button to start playback.
General control (See page 12.)
Downloaded from: http://www.usersmanualguide.com/