E-21
CD-M10000W(X)E3.fm01/10/1
CD-M10000W
ENGLISH
Tape Playback
- Listening to a cassette tape (TAPE 2) -
Listening to a cassette tape (TAPE 2)
To stop playback:
Press the button.
Fast forward/rewind on side A:
To advance the tape, press the ( ) button. To rewind it, press the
( ) button.
Fast forward/rewind on side B:
To advance the tape, press the ( ) button. To rewind it, press the
( ) button.
Caution:
!
To remove the cassette, press the button, and then open the compartment.
!
Before changing from one tape operation to another, press the button.
!
If a power failure occurs during tape operation, the tape head will remain engaged
with the tape and the cassette door will not open. Wait until the power is restored.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE (1 2) button to select TAPE 2.
3
Open the cassette door by pushing
the area marked " PUSH EJECT".
4
Load a cassette into the TAPE 2 cas-
sette compartment with side A facing
you.
5
Press the button to choose one
side or both sides.
... To listen to both sides.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the ( ) button to listen to side A, or the button for side
B.
To play both sides ( ), start from side A. When playback starts from side B, side
A will not be played.
General control (See page 12.)
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
