Sharp CD-PC651H

(Main unit operation) T
JCRAGE IDEMO |
(Main unit operation)
OME
@ 2 "AA" size baiteries
(UM/SUM-3, R6,
HP-7 or similar)
Hi Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode and the words will scroll across the dis-
play continuously.
Note:
@ When the power is on, the X-BASS/DEMO button can-be used
to select the extra bass mode.
To cancel the demonstration mode:
In the power stand-by mode (demonstration mode), press the
X-BASS/DEMO button to cancel the demonstration nee and to
enier the low power consumption mode.
When ithe X-BASS/DEMO button is pressed again, the unit will
return to the demonstration mode.
Note:
@ When the unit is in the low power consumption mode, the
display will disappear.
Mi To change the brightness of the display
Press the DIMMER button.
@ The display will be made dimmer.
Note:
@ When you change the brightness of the display, the multi in-
dicator wil! not appear.
To return to the original brightness:
Press the DIMMER button again.
Hi Remote control
@ When inserting or removing the batteries, push them towards
the © battery terminais.
@ Installing the batteries incorrectly may cause the unit to mal-
function.
Precautions for battery use:
@ Insert the batteries according to the direction indicated in the
battery compartment.
@ Replace all old batteries with new ones at ihe same time.
@ Do not mix old and new batteries.
@ Remove the batteries if they are weak or if the unit will not be
used for long periods of time. This will prevent potential dam-
age due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
@ Replace the baitieries if the operating distance is reduced or if
the operation becomes erratic.
@ Periodicaily clean the transmitter LED on the remote conirol
and the sensor on the main unit with a soft cloth.
@ Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
@ Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
E-9