Sharp CD-PC671H - Page 10

CD-PC671H/PC651H
– 10 –
CP-C651H
1 Front Speaker 1. Net.......................... (A1) x1 10-1
2. Front Panel ............ (A2) x1
3. Screw ..................... (A3) x4
4. Tip .......................... (A4) x2
5. Screw ..................... (A5) x2
6. Tip .......................... (A6) x2
STEP REMOVAL
PROCEDURE
FIGURE
CP-C651H
Figure 10-2
Figure 10-3
(A6)x2
(A5)x2
ø3x10mm
(A3)x4
ø4x12mm
(A4)x2
Front Panel
(A2)x1
Net
(A1)x1
Screw Driver
CP-C671H
1 Front Speaker 1. Front Panel ............ (A2) x1 10-1
2. Tip .......................... (A4) x2
3. Screw ..................... (A3) x2
4. Screw ..................... (A5) x2
5. Screw ..................... (A5) x2
STEP REMOVAL
PROCEDURE
FIGURE
CP-C671H
(A4)x2
ø3x10mm
(A3)x2
ø3x10mm
Front Panel
(A1)x1
Screw Driver
Woofer
Tweeter
Super
Tweeter
(A5)x4
ø4x14mm
(A2)x2
Figure 10-1
CP-SW671H
CP-SW671H
1 Sub woofer 1. Net.......................... (A1) x1 10-2
3. Screw ..................... (A3) x4
STEP
REMOVAL PROCEDURE FIGURE
Note:
The rear speakers and center speaker can be easily
disassembled.
Therefore the disassembling method is not described.
For details refer to the disassembling drawing in the
Parts Guide.
(A2)x4
ø4x12mm
Screw
driver
Drive should be pried
away from Speaker Box.
Direction of handle
Woofer
Speaker
Box
(A1)x1
(CD-PC671H Only)
(CD-PC671H Only)