A
ll
and more about Sharp P
C-
1500 at http://www.PC-1500.info
• How
to
install and exchange writing
pens
Four
different
colo
r
ball
poinl
pens
can
be
used
on
this
printer,
They
must
be
arranged
in
positiun
shown below.
Pen positi
on
detect magnet
Use
the following i11structions to install
or
exchange pen(s).
When
pen position,
0-3,
is
chosen
by
th
e COLOR com-
mand,
it
will
be
selected by
the action
of
the pen posi-
tion detect ma;gnet. Pen posi-
tions are arranged
in
order
of
0, I, 2, 3, clockwise from the
magnet position. However,
the pen holder rotates
counterclockwise
to
bring the
designated pen into the upper
position.
I)
Push
the W key
on
the printer while depressing the
[QJ
key on the pocket computer. The
printer now goes into the pen exchange mode and the pen holder
mO\·es
to
the left margin.
It
rotates
to
bring the first replaceable pen
to
the upper position, then it moves
to
the right margin
and
waig
for the pen replacement there. Be sure
to
release your finger from the key
as
soon
as
the pen holder starts to move.
2)
Push
down
the
pen
release
lever
to
remove the pen on the upper position.
NOTE: Place
yo11r
finger tip lightly
in
front
of
the pen before
ren1ovi.ng the pen,
in
order
to
prevent the pen from jumping
into the
printer
mechanism
.
3) Replace with the new pen.
4)
To
re
move
or
replace a succeeding pen, p1nh the
J]
key again. This makes the pen holder
move
to the
le
ft marg
in
3Jld
the pen holder ro!ates to !he next exchanging pen position, and then starts
to
move
M the right margin.
As
soon as. !he pen holder stops al the right margin, remove M
replace
the
pen
witl1
tl
ie new one in accordance Steps, 2 and
'.l.
5)
Y..
l
1en
pen replacement or instaJlation
is
finished, push the I CL J key
of
the pocket compuler
together with the [I) key on the printer. Then, the pen exchange mode
is
cancelled and the pen
hol
de
r returns to the left margin.
Do
not sale this PDF
!!!
s
To Next Page
Loading...
