EasyManua.ls Logo

Sharp MX3050

Sharp MX3050
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Step 1. Open the
front cover of your
machine.
Slit glass cleaning wand
Charge cleaner wand
Step 2: Remove waste
container
Press in green tabs on both ends of
the waste container to release.
Pop out and carefully remove waste
container from machine
Question and Answer IconNeed help?

Do you have a question about the Sharp MX3050 and is the answer not in the manual?

Sharp MX3050 Specifications

General IconGeneral
Print Speed30 ppm
Resolution1200 x 1200 dpi
Duplex PrintingYes
TypeMultifunction Printer
Scan Resolution600 x 600 dpi
Scanner TypeColor Scanner
Copy Speed30 cpm
Fax Speed33.6 Kbps
Network ConnectivityEthernet
ConnectivityEthernet, USB 2.0
Supported Paper SizesA3, A4, A5, B4, B5
Weight76 kg
FunctionsPrint, copy, scan
Original SizeA3
Operating System CompatibilityWindows, Mac, Linux

Summary

Machine Preparation and Waste Container Removal

Access Cleaning Wands

Identify and access cleaning wands for slit glass and charge cleaner.

Remove Waste Container

Steps to release and remove the waste container by pressing green tabs.

Clean for Void Areas

Insert Gray Wand Above Black Sticker

Detailed instruction for inserting the gray cleaning wand into the correct hole.

Run Cleaner Front to Back

How to operate the cleaning wand for effective cleaning of void areas.

Clean for Lines on Prints

Insert Green Wand Below Green Sticker

Detailed instruction for inserting the green cleaning wand into the correct hole.

Run Cleaner Front to Back

How to operate the cleaning wand for effective cleaning of lines.

Clean Glass for Lines on Scans

Lift Document Feeder Lid

Action to lift the document feeder lid to access the glass.

Clean Glass with Cloth and Cleaner

Method to clean copy and slit glass using a cloth and cleaning solution.

Related product manuals