Sharp DR-P320 Quick Start Guide

3
available radio station on the frequency.
In DAB mode pressing takes you to the
list of available stations.
8. Pre-set buttons (1/2/3/4) – Press the
corresponding button to select saved/
preset radio station 1-4.
Long press the coresponding number to
store current radio station in to preset
number.
Picture 2 - REAR PANEL:
9. Battery compartment cover
10. Switch - DC power on / Battery power on
11. DC IN (micro USB)
12. Telescopic antenna/aerial
Battery installation
1. Remove the battery compartment cover
on the rear panel of the unit.
2. Install 4 x AA/R6 (1,5V) batteries (not
included) into the battery compartment
making sure that the battery have been
inserted with the correct polarities
matching the symbols +/- as indicated
inside the battery compartment.
3. Replace the cover.
FM tuner Operation
1. Short press Source/Standby to power
on. Short press Source/Standby again to
enter FM tuner mode.
2. To automatically search for the next/
previous available radio station, press
and hold for 2 seconds the or
button.
3. Press and hold Select/Scan button when
in FM mode and it will automatically scan
the frequency range and save presets
for radio stations discovered. To access
“preset recall” press the Stations/Save
button.

Sharp DR-P320 Specifications

General

Radio type	Portable
Tuner type	Digital
Supported radio bands	DAB, DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
Material	Plastic
Projection	-
Antenna type	External
Product color	Black
On Screen Display (OSD) languages	DEU, ENG, FRE, ITA
Power source	Battery, USB
Power consumption (standby)	0.8 W
Power consumption (typical)	2 W
Battery type	AA
Battery voltage	1.5 V
Battery technology	Alkaline
Number of batteries supported	4
Speaker type	Full range
Number of built-in speakers	1
Display diagonal	2.4 \
USB connector type	Micro-USB
RMS rated power	- W
Sustainability certificates	REACH