EasyManua.ls Logo

Sharp DR-P320 - Troubleshooting: Poor Signal Reception; Troubleshooting: No Sound or Distorted Sound; Troubleshooting: Button Functionality

Sharp DR-P320
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
Solution
• Please check that the USB cable is connected
securely.
• Please check the power source switch on the
back of the radio is set to the active power
supply (Battery/DC). If using batteries, please
also check a new set (or recharge them if
they are rechargeable batteries).
No Sound (There is no sound or the
sound is distorted.)
Reason
• The volume is set to the minimum level.
Solution
• Turn up the volume.
The buttons on the unit do not work.
Reason
• Unit is being used near to a source of static
electricity.
Solution
• Switch o and unplug the unit.
• Then connect the plug to the power supply
and switch it on again.
Poor signal reception
Reason
• Stations are being lost or reception is
interment.
Solution
• Extend the aerial to its fullest extent,
• Change the position of the radio.
• Move the radio to another location.