Sharp DR-P320 User Manual

EN
Accessories
1x Digital radio player
1x User manual
1x USB cable
Panels/Controls
See pictures on the rst page.
Picture 1 - FRONT PANEL:
1. Display screen
2. Source/Standby – Press to switch on
the unit.
Press and hold to switch o the unit.
Press to switch between DAB and FM
mode when the radio is on.
3. Stations/Save – short press takes you
to "preset recall" i.e. saved stations. Long
press takes to you "preset store" to choose
location number where you save a station.
4. Select/Scan, Volume (Scroll) – Press and
hold the Select/Scan button to auto scan
for available radio stations, press it again to
stop the auto scan and enter the Menu.
Volume +/- knob – Turn to adjust the
volume level or to scroll the cursor within
Menu.
5. Info/Menu – Press the button to change
display options.
Press and hold the button to enter or exit
the menu.
6.
– In FM mode pressing will manually
change the frequency by +0.05MHz, press
and hold to scan forward to the next
available radio station on the frequency. In
DAB mode pressing takes you to the list of
available stations.
7.
– In FM mode a pressing will manually
change the frequency by -0.05MHz, press
and hold to scan back to the next available
radio station on the frequency. In DAB

Sharp DR-P320 Specifications

General

Radio type	Portable
Tuner type	Digital
Supported radio bands	DAB, DAB+, FM
Radio Data System (RDS)	Yes
Preset stations quantity	20
Material	Plastic
Projection	-
Antenna type	External
Product color	Black
On Screen Display (OSD) languages	DEU, ENG, FRE, ITA
Power source	Battery, USB
Power consumption (standby)	0.8 W
Power consumption (typical)	2 W
Battery type	AA
Battery voltage	1.5 V
Battery technology	Alkaline
Number of batteries supported	4
Speaker type	Full range
Number of built-in speakers	1
Display diagonal	2.4 \
USB connector type	Micro-USB
RMS rated power	- W
Sustainability certificates	REACH