Sharp DV-3750S - Page 17

<How to Use the Off Timer>
1. Press the Off Timer button.
2. The previously set time will be displayed in red
for about 5 sec, at the lower right of your screen.
(The previously set time is stored in memory.)
3. If your wish to set the timer to the previously set
time, then setting is now complete.
4.
If
you
wish
to
set
the
timer
to
a
time
different
from
the
previously
set
time,
then
press
the
Off
Timer
button
again
while
the
time
is
still
being
displayed
on
the
screen.
5. Each time you press the bution, the display will
change as shown.
*** —5 0.00 — 0.10 - ---— 12.50 — 0.00 (cancel)
t_ prey. ee ae ape
ae
. lf the previously set time is “0.00”, or if you
are setting the timer for the first time since
buying your set, begin at “0.00”.
2.
If
the
Main
Power
or
the
standby
ON/OFF
is
turned
off
after
the
Off
Timer
has
been
sei,
the
Off
Timer
will
be
canceled.
3.
If,
after
setting
the
Off
Timer,
the
Off
Timer
button is pressed again while the set is
turned on, then the timer will be reset.
OGso)
|. OFF 4. J
On Screen Display
(In this event, the Off Timer
operates after 4 hours)
Channel/Timer Call Button ©)
°
The
channe!
number
is
displayed
on
the
screen
by pressing the Channel/Timer call button on the
remote
control
when
the
On-Timer
or
the
Off-
Timer
is
not
set.
Press
the
button
again
and
the
display will disappear.
¢ ff the Channel/Timer call button is pressed while
the
On-Timer
or
the
Off-Timer
function
is
set,
the
time
remaining
on
the
On-Timer
or
the
Off-Timer
and the channel number will be displayed. For
example,
a
display
of
OFF
0.23
indicates
that
the TV will be turned off after 23 minutes.
OFF 0.23