EasyManua.ls Logo

Sharp DW-209EX - Changing the Operation Mode; Dry Clothes Operation; Dehumid Settings Operation

Sharp DW-209EX
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Changing the Operation Mode
Dry clothes operation
(Example of indication) When DRY CLOTHES SETTING is operated.
STANDARD This continuously operates at STANDARD MEDIUM air volume.
GENTLE Select this to dry lingerie gently and quietly. This continuously operates at LOW air volume.
FAST
Select this when you are in a hurry to dry large quantities of clothes.
This continuously operates at HIGH air volume.
Dehumid settings
operation
(Example of indication) When DEHUMID SETTINGS operation is carried out.
AUTO DRY Use the following conditions under a normal dehumidifying operation.
Humidity in the room is adjusted by the temperature moisture sensor.
It will be automatically controlled at a humidity of about 60% at temperature of
27°C or less and at about 55% at 28°C or more. However, dehumidifying opera-
tion occasionally vary depending upon the structure or size of the room.
ROOM DRY Humidity (around the unit) in the room can be automatically controlled to about
50% by the temperature-and-moisture sensor.
*
Humidity may not fall to less than 50%, depending upon operating conditions
(outside temperature, room size).
CONTINUOUS DEHUMID operation is continuously carried out by controlling the volume
DRY of airflow: MEDIUM at temperature of about 15°C or more and HIGH at about
15°C or less.
CLEAN AIR Select this when you want to use the unit as a CLEAN AIR device.
Only ventilation operation is available.
*
The CLEAN AIR function can automatically work in each mode of operation.
DRY CLOTHES
SETTINGS but-
ton
Power ON/OFF
button
DEHUMID
SETTINGS
button
Power ON/
OFF button
It will be changed in the following order whenever press-
ing the DEHUMID SETTINGS button. It starts at the AUTO
DRY operation.
*
During defrosting, no other operation mode can be selected. If you select a new operation mode during defrosting,
the mode will switch automatically after completion of defrosting.
It will be changed in the following order whenever
pressing the DRY CLOTHES SETTINGS button. It
begins in the STANDARD operation.
Changing the Operation Mode
FAST
STANDARD
GENTLE
DRY CLOTHES
SETTINGS
ON/ OFF
1
Pip
2
AUTO DRY
ROOM DRY
CONTINUOUS
CLEAN AIR
DRY
FAN SPEED
DEHUMID
SETTINGS
ON/ OFFHIGH LOW
2
1
Pip

Related product manuals