21
Specifications
Specifications
Model
Frequency
Rated voltage
Rated dehumidification capacity
Rated power
consumption
*
Stand by mode
Dehumidification area
Water tank capacity
Weight
Outside dimensions
Length of power supply cord
●
The capacity rating is based on a day’s operation at a temperature of 30°C and relative humidity of
80%. (AUTO DRY, ROOM DRY, CONTINUOUS DRY: FAN SPEED/HIGH ON)
●
Power consumption ratings are based on operation at a temperature of 30°C and relative humidity of
80%. (AUTO DRY, ROOM DRY, CONTINUOUS DRY: FAN SPEED/HIGH ON)
●
The dehumidification area is based on Japanese Electrical Manufacturers’ Association (JEMA) Stan-
dards.
*
The term “stand-by” means that the dehumidifier is kept at “OFF” position even though its plug has
been inserted into the power socket.
Supplied Accessories
Air purifying filter
(1)
Printed matter
●
Operation manual
Air purifying filter (for replacement)
(This removes the smell of cigarette smoke, fine dust etc.)
●
Model: DW-10C
To purchase this filter, specify this model number to the store where
you purchased the product or to the SHARP service center.
DW-209EX
50Hz
220V
20.0
310
3.5
25 ~ 50
(Wooden houses ~ concrete houses)
Approx. 6.4 (Automatic stop at 5.7)
13.5
380 (W) x 275 (D) x 589 (H)
Available length approx. 1.8
L /Day
W
W
m
2
L
kg
mm
m
Elbow joint
(1)
Used for hose connection for
continuous water drainage.
Optional Accessories
Optional Accessories
To Next Page
Loading...
