EasyManua.ls Logo

Sharp DW-71-H - Page 3

Sharp DW-71-H
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
DW-71-H
Note
Make sure that the unit is operated on a flat and solid surface.
Uneven surface can cause spilling of the stored water and wet other household furnitures or 
appliances and cause electric shock, electrical leakage or fire.
During continuous drainage, make sure that the hose is not bent and the hose 
outlet is laid down properly.
Otherwise the drained water might spill and wet household appliances.
Lay the hose 
on a down
slope.
10 cm or more
Do not bend the 
drain hose.
Do not put the 
open end of
the drain hose 
in water.
Attention
When a draining hose is to be used, make sure that the temperature around the 
hose is above 0°C. Otherwise water in the hose might freeze and undrained 
water might spill in the room.
When operating
Warning
Important 
Do not stick your finger or any object into the air outlets
or intake.
The rotating internal fan can cause injuries.
Do not operate the unit with voltages other than the 
rated voltage of 230V.
This can result in electric shock or fire.
Do not use an extension power supply cord or share the socket with other 
electrical appliances.
This can cause electric shock, overheating or fire.
Avoid damaging the power supply cord or modifying it on your own.
This can cause electric shock or fire. 
Laying heavy objects, nipping, heating or pulling can damage the cord.
Do not start or stop the operation by inserting or pulling out the 
plug from the socket.
This can cause electric shock or fire.
Avoid heating sources
Do not place the unit near heating sources.
Resin parts of the unit might melt and catch fire.

Related product manuals