Sharp EL-6660 - Page 19

The time can be set using either the 12-hour or 24-
. hour format. When you move the cursor to the next
entering, the time is displayed in the format selected
in the Clock mode.
If an attempt is made to store an invalid time, you can-
not move the cursor to the next entering. Enter the
correct time and follow the next procedure.
. Enter the schedule detail.
L (CAPSJUNCH WITH (CAPS)T
(CAPS)OM
To move the cursor to the new line when the cursor is
on the middle of the line, press (+).
When "+" (or " 4") is displayed, there are additional
lines that do not fit on the display. Press C4 7 (or {= Y)
to display them.
. Press to store the listing.
If the memory is full, "MEMORY FULL" will be dis-
played briefly and schedule listing cannot be stored.
CALENDAR
. Now, press
to check if the listing is
stored in memor y.
Notice the tag (F) next to "February 24". It indicates a
schedule item for that date:
A tag at the upper right of the date indicates items
starting in the morning or items without specified time.
A tag at the lower right of the date indicates items
starting in the afternoon.
A tag in the center right of the date indicates the anni-
versaries. (Refer to page E21.)
(2) Entering the desired date with (2 (or (=)
This way is convenient for entering a nearby date. Press
N (or A) and change the display day by day until the
desired date appears.
Example:
Enter a schedule listing on February 11, 1998.
SCHEDULE
1. Press to display time entry prompt for the
current date (February 8, 1998).
2. Press M repeatedly until time entry prompt for Feb-
ruary 11, 1998 appears. Enter the time and detail fol-
lowing the procedure for "(1) Entering the desired date
in Calendar mode" (from step 4) on page E16.
(3) Entering the desired date directly
When the date is not close to the currently displayed date,
this way is more convenient than the above 2 ways.
Example:
Enter a schedule listing on November 26, 1998.
SCHEDULE
1. Press to
display the date entry
prompt.
2. Enter the date.
11261998
3. Press ( ENTER ). Time entry prompt for Novemver 26,
1998 is displayed. Enter the time and detail following
the procedure for "(1) Entering the desired date in
Calendar mode" (from step 4) on page E16.
MONTH
DAY
42
:08
:1998 YEAR
E17