Sharp EL-6660 - Page 20

* |f an attempt is made to store an invalid date, you
cannot move to the time entry prompt. Enter the cor-
rect date and follow the next procedure.
2. Recalling Schedule Listings
The entered listings will automatically be stored in chrono-
logical order based on the data on the starting time.
There are 5 ways to recall schedule listings:
(1) Sequential search
(2) Direct search
(3) Keyword search
(4) Date search (in Schecule mode)
(5) Date search (in Calendar mode)
(1) Sequential search
Recall listings in order. Press V (or A) to recall listings
in forward (or reverse) order.
Hold down [32 (or (^) for rapid recall.
* When nothing has been entered for that day, only the
time entry prompt is displayed.
* Press to recall today's schedule listings.
Then press M repeatedly to check if the other listings
are scheduled for today.
e Press [S2 (or (2nd }A)) repeatedly to recall list-
ings skipping empty dates. After the last (or first) listing
in chronological order has been found, "NOT FOUND !"
is displayed momentarily.
* Press (c-ce), then press 2 (or
(A) to display the first (or last) listing in chronological
order.
(2) Direct search
Recall listings by the first character(s) of the detail. Enter
the first character(s) of the desired schedule detail and
then press (M (or (^). The search begins from the cur-
rently displayed date in forward (or reverse) order.
e Each time V (or A) is pressed, sequential search will
be performed.
(3) Keyword search
Recall listings by a word contained in the detail. Enter a
keyword that is contained in the desired schedule detail
and then press (2nd J| (or ( 2na XX). The search begins
from the currently displayed date in forward (or reverse)
order.
* Each time (2n | (or (2nd XX) are pressed, subse-
quent listings with the same keyword will be displayed
repeatedly.
* If no appropriate listing is found in memory after a di-
rect search or a keyword search, "NOT FOUND !" is
displayed momentarily. Direct and keyword searches
are not case sensitive.
(4) Date search (in Schedule mode)
Recall listings by the date. Press (c-cE)(c-cE), then enter
the date and then press (ENTER ).
« This is the same procedure as step 1 to 4 in "(2) Date
search" in Calendar mode on page E14.
E18