Sharp EL-6660 - Page 37

2. Adjusting the Contrast
See page E2 for operation.
3. Clearing the Memory
(1) Deleting all of the data in each mode
If all of the entire data for Telephone, Schedule, Anniver-
sary, or Memo mode is unnecessary, you can delete all of
the data in each mode individually.
Example:
Delete all listings in the TEL1 file:
1. Press DT).
2. Press Em
"TEL 1 DELETE ? Y/N" is displayed.
* When "SECRET ON MODE" is displayed, the Secret
function is on and the file cannot be deleted. In this
case, turn the Secret function off and repeat the abo ve
procedure.
* Even after you have designated the file name, the
message does not change accordingly.
3. Press ( Y |.
All listings in the TEL1 file (including secret listings)
will be deleted.
* To cancel the deletion operation, press ( N |.
* To delete all listings in Memo mode, press (2 to dis-
play the next page in step 2.
(2) Deleting the Password and Secret Listings
The password and all secret listings can be deleted at the
same time.
1. Press D (1)
2. Press (M ( 2 ).
"ALL SECRET DATA DELETE ? Y/N" is displayed.
3. Press ( Y |.
e "ALL SECRET DATA DELETED !" is displayed mo-
mentarily and the password and all secret listings are
deleted.
e To cancel the deletion operation, press ( N |.
(3) Clearing all Memory Contents
1. Press W to display the numbers
of listings stored in TEL1, TEL2, and TELS files, and
the number of stored memo listings.
2. Press (DEL).
"CLEAR ALL DATA OK (Y/N) ?" is displayed.
3. Press ( Y ).
e To cancel the deletion operation, press ( N ).
Data in clock mode, such as the time and daily alarm time,
will also be cleared.
4. Changing the File Names
See page E10 for operation.
E34