919-D: 1. Conversion ST printing of native ST
1. Conversion SBTL print of native SBTL 919-D
Yes 0
★
No 4
[JOB#920] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#921] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#922] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#923] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#924] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#925] NOT USED ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#926] ER-A440: MRS = 0400
ER-A440: MRS = 0400
#926-A: Not used (Fixed at "0")
#926-B: 1. Program reset at PGM2 mode
1. Program reset at PGM2 mode 926-B
Disable 0
Enable 4
★
#926-C, D: Not used (Fixed at "00")
[JOB#927] ER-A440: MRS = 0000
ER-A450: MRS = 0000
#927-A: 1. Rounding up of the units digit of amount
#927-B: 1. Rounding down of the units digit of amount
1. Rounding the units digit of amount 927-AB
Common destination 00
★
Netherland/Switzerland 82
Norway 54
#927-C: 1. Difference memory (Difference between before-round-
ing and after-rounding)
2. Limit on the least sighificant digit in entering the amount
on item
1. Difference memory 2. Limit on the least
sighificant digit in
entering the amount
on item
927-C
No
Arbitary 0
★
0 only 1
0 and 5 only 2
Yes
Arbitary 4
0 only 5
0 and 5 only 6
#927-D: 1. Application of rounding
2. Limit on the least significant digit in entering the amount
of payment
1. Application of rounding 2. Limit on the least
significant digit in
entering the amount of
payment
927-D
Item & Payment
Arbitary 0
★
0 only 1
0 and 5 only 2
Payment
Arbitary 4
0 only 5
0 and 5 only 6
[JOB#928] NOT USED: ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#929] NOT USED: ER-A440: MRS = 0000
ER-A450: MRS = 0000
#929-A: Not Used (Fixed At "0")
#929-B: 1. Message LOGO print on Journal
1. Message LOGO print on Journal 929-B
No 0
★
Yes 2
#929-C: Not used (Fixed at "0")
#929-D: Taxable status of PLU which is set at "Non-taxable" by
PGM.
1. Taxable status of PLU which is set at
"Non-taxable" by PGM.
929-D
According to its associated department 0
★
Non taxable 2
[JOB#980] ER-A440: MRS = 0000
ER-A450: MRS = 0000
#918-A: Not used (Fixed at "0")
#980-B: 1. Total amount rounding when a transaction is finalized
directly by CHECK or CREDIT key (For Australia)
This selection is not effective at Manual Tax 1-6 sys-
tem.
1. Total amount rounding 980-B
Yes (Rounding) 0
★
No (Not rounding) 2
#980-C: Not used (Fixed at "0")
#980-D: 1. VAT/TAX assignment print
1. VAT/TAX assignment print 980-D
Print 0
★
Not 2
1 – 10
To Next Page
Loading...
