#914-C 1. Action to be taken when the machine is locked by the
Receipt/Journal paper near end check
2. Void mode
1. Action to be taken when the
machine is locked by the
Receipt/Journal paper near end
check
2. Void mode
914-C
Unlocked by CL key Enable 0
★
Disable 2
Enforcing of paper roll
replacement
Enable 4
Disable 6
#914-D: 1. CHECK CASHING Enable/Disable
1. CHECK CASHING 914-D
Disable 0
★
Enable 2
[JOB#915] ER-A440: MRS = 0020
ER-A450: MRS = 0020
#915-A, B: Not used (Fixed at "00")
#915-C: 1. Paper near end check
2. ST (–), ST (%) as many times needed/operation only
once
1. Paper near end
check
2. ST (–), ST (%) as many times
needed/ operation only once
915-C
Yes
Unlimited 0
Once only 2
★
No
Unlimited 4
Once only 6
[JOB#916] ER-A440: MRS = 1000
ER-A450: MRS = 1000
#916-A: 1. Print format when text and amount overlaps each other
REG mode
1. Print format when text and amount overlaps each
other REG mode
916-A
Truncate text 0
2 line print 1
★
#916-B: 1. Finalization by charge (credit) when ST 0
2. Tendering which is smaller than the sales amount
1. Finalization by charge
(credit) when ST
0
2. Tendering which is
smaller than the sales
amount
916-B
Disable
Enable 0
★
Disable 2
Enable
Enable 4
Disable 6
#916-C: 1. Negative merchandise subtotal
2. Subtotal entry compulsory before tendering
3. Subtotal entry before direct non-tendering finalization
1. Negative
merchan-
dise
subtotal
2. Subtotal entry
compulsory
before
tendering
3 .Subtotal entry
before direct
non-tendering
finalization
916-C
Allow
Noncompulsory Non-compulsory 0
★
Compulsory 1
Compulsory Non-compulsory 2
Compulsory 3
Disallow
Non-compulsory Non-compulsory 4
Compulsory 5
Compulsory Non-compulsory 6
Compulsory 7
#916-D: 1. Coupon PLU printing on X/Z report
2. Net sales subtotal (NET1) printing on X/Z report
3. CHECK change total printing on X/Z report
1. Print coupon
PLU’s on
general report
2. Print net
sales SBTL
(NET1) on
general report
3. Print CHK
CHANGE on
general report
916-D
Print
Print
Print 0
★
Skip 1
Skip
Print 2
Skip 3
Skip
Print
Print 4
Skip 5
Skip
Print 6
Skip 7
[JOB#917] NOT USED: ER-A440: MRS = 0000
ER-A450: MRS = 0000
[JOB#918] ER-A440: MRS = 0000
ER-A450: MRS = 0000
#918-A: 1. Direct non-tendering finalization after previous tender
entry
1. Direct non-tendering finalization after previous
tender entry
918-A
Disable 0
★
Enable 2
#918-B: Not used (Fixed at "0")
#918-C: 1. Printing of Z1/Z2 counter in Z reports
1. Printing of Z1/Z2 counter in Z reports 918-C
Yes 0
★
No 4
#918-D: Not used (Fixed at "0")
[JOB#919] ER-A440: MRS = 4000
ER-A450: MRS = 4000
#919-A, B Not used (Fixed at "00")
#919-C: 1. Amount printing when PLU unit price is 0
1. Amount printing when PLU unit price is 0 919-C
No 0
★
Yes 1
1 – 9
To Next Page
Loading...
