[JOB#2614]
LOGO TEXT PROGRAMMING
X: 1 ∼ 6 1 (24 char.)
2 (24 char.)
3 (24 char.)
4 (24 char.)
5 (24 char.)
6 (24 char.)
Character can be entered by using character keys or numeric keys.
The key entry sequence for entering one character by numeric keys
is as follows:
XXX
→ 00 Key XXX: Character code (3 digits)
Please refer to section 4.
NOTE: This programming is related to JOB# 912D programming.
The programable line has below relations with each key word
at JOB# 912D.
"6-line header": All 6 lines are programmable.
"3-line header": Upper 3 lines (1st-3rd line) are pro-
grammable.
"3-line footer": Lower 3 lines (4th-6th line) are pro-
grammable.
"Graphical LOGO only": No line is programmable.
[JOB#2615]
Programming of the No. of times of validation printing and feed line
after printing Differ ST.
A (For ER-A440): No. of times of validation printing = 0 to 9
A (For ER-A450): Not used (Fixed at "0")
B: Feed line after despression of differ subtotal key = 0 to 9
MRS = 10 (For ER-A440)
00 (For ER-A450)
[JOB#2616]
OPTIONAL FEATURE
X: 1 MRS = 00000000
A: OP X/Z report A
Enable 0
Disable 1
B: PO operation in REG mode B
Enable 0
Disable 1
C: Not used (Fixed at "0")
D: "RFND" key entry in REG mode D
Enable 0
Disable 1
E: Direct void function in REG mode E
Enable 0
Disable 1
F: Indirect void in REG mode F
Enable 0
Disable 1
G: Subtotal void in REG mode G
Enable 0
Disable 1
H (For ER-A440):
Refund VP H
Non compulsory 0
Compulsory 1
H (For ER-A450): Not used (Fixed at "0")
X: 2 MRS = 00000000
A: The first last item void A
Enable 0
Disable 1
B, C: Not used (Fixed at "00")
D: Printing of the number of purchases D
No 0
Yes 1
E: Time print E
Yes 0
No 1
F: Printing of journal F
Full print 0
Journal select 1
G (For ER-A440):
Item VP G
Enable 0
Disable 1
2614 Character key
X
Position code
All space
ST TL
(ER-A450)
MRS=
(ER-A440)
0
2615 AB TL
2616 ABCDEFGH
No change
XX
ST TL
2 – 16
To Next Page
Loading...
